Montana Infrared Heater Sunheat 150m3 with Remote Control GD9215BD1

Montana Infrared heater GD9215BD1 Sunheat : Transitive Infrared Heating with Remote Control for a room of 150m3

The Montana Infrared Heater provides transitive Infrared heating. The air optimally heated by infrared lamps, spreads quickly and evenly throughout the room. This is called Transitive Infrared Heating, as opposed to Static Infrared Heating (which only gives off radiant heat in the immediate vicinity of the heater).

Advantages Montana Infrared heater over radiant heaters

• No drop in humidity.
• No drop in humidity.
• Healthy “solar” air heating.

How to use the Montana Infrared heater

• 1- Insert the plug into the socket.
• 2- Turn on the heater with the main on-off switch on the back side of the unit. A red indicator light will now come on using only 0.1 watt.
• 3- Use the remote control or press the Power button on the front of the stove to turn the stove on.
• 4- Power off: Turn off the stove using the remote control or press the Power button. The Fan will continue to run until the thermostat inside the stove has cooled down sufficiently. Therefore, do not unplug or turn off the stove with the ON/OFF button on the back side of the stove as this will disable the thermostat. If the fan stops running, you can turn off the ON/OFF switch and/or unplug the stove.

Features Montana Sunheat infrared heater

• Heating capacity up to 60 m2/ 150 m3.
• Four infrared heating tubes, 375 watts each.
• Low-noise fan.
• Direct Flow Warm-up Chamber.
• 2 settings: Low 750 watts / High 1500 watts.
• ECO system for economical power consumption.
• Electronic thermostat with overheat protection.
• Panel and display.
• On/Off Timer.
• Fireproof steel cabinet around the stove.
• Overheating, protection switch.
• Remote control included.

Weight

5.95 kg

Montana Infrared Heater Dimensions

33 x 19.2 x 30.5 cm

Dimensions and type of packaging

Gift box with a size of 39 x 24 x 16.5 cm

Montana Infrared heater warranty

2 years factory warranty